Reply To: Sync issue on Enterprise 128

[JohnFante]

I am waiting for a new RGB-cable with a 220 ohm resistors instead of the 100 ohm to see if that solves my sync problem.

In the meantime I am looking for advice on getting the OSSC to show a interlaced picture correctly.

The image is this loading screen. When I run the program the picture turns on and off like this.

I have talked to the author of the program and he writes this about the picture:

“It is an interlace LPT:

40 lines upper border
6×9 lines are 6 4color character lines (Bricky text)
100 lines are attribute mode
6×9 lines are 6 4color character lines (Prise text)
28 lines between Prise text and Enterprise text
8 lines Enterprise text
2 lines color lines
sync: 14+3+4+1+4
40+54+100+54+28+8+2+26=312
Sync (there is no reload bit in this sync
F2 92 3F 00 00 00 00 00 00 00 00 00 00 00 00 00
FD 00 3F 00 00 00 00 00 00 00 00 00 00 00 00 00
FC 00 20 3F 00 00 00 00 00 00 00 00 00 00 00 00
FF 00 3F 38 00 00 00 00 00 00 00 00 00 00 00 00
FC 12 06 3F 00 00 00 00 00 00 00 00 00 00 00 00
LPT continuing
40 lines upper border
6×9 lines are 6 4color character lines (Bricky text)
100 lines are attribute mode
6×9 lines are 6 4color character lines (Prise text)
28 lines between Prise text and Enterprise text
8 lines Enterprise text
2 lines color lines
sync: 14+3+4+1+4
40+54+100+54+28+8+2+26=312
Sync: (here reload bit sets, so this is the end of LPT)
F2 92 3F 00 00 00 00 00 00 00 00 00 00 00 00 00
FD 00 3F 00 00 00 00 00 00 00 00 00 00 00 00 00
FC 00 06 3F 00 00 00 00 00 00 00 00 00 00 00 00
FF 00 3F 20 00 00 00 00 00 00 00 00 00 00 00 00
FC 13 06 3F 00 00 00 00 00 00 00 00 00 00 00 00”

Is the OSSC not capable of showing interlaced pictures?