NewHome › Forums › OSSC & OSSC Pro › OSSC – Discussion and support › Issues setting up PS1 with OSSC – No sync. › Reply To: Issues setting up PS1 with OSSC – No sync.
nmalinoskiIf you’ve got the OSSC set to AV1-RGBS, and it’s flickering like that, I’d be inclined to blame something in the cable, either the sync stripper or the 1000uF caps if you bought yours from Retro-Access and didn’t specify 220uF caps.
There’s no need for a CSync cable when using an OSSC, so I would instead try a sync-on-luma cable made with 220uF caps; that would bring the cable to spec (assuming your isn’t) and eliminate the unnecessary sync stripper. On the other hand, it might simply be cheaper to buy another PS1 on eBay and see if it’s your console at fault. 🙂
