Reply To: [Solved] Image too bright (clipped) when using AV2 YPbPr input

NewHome Forums OSSC, OSSC Pro and DExx-vd isl OSSC – DIY Support [Solved] Image too bright (clipped) when using AV2 YPbPr input Reply To: [Solved] Image too bright (clipped) when using AV2 YPbPr input

#44070
Nehalem501
Participant

After some troubleshooting I’ve managed to find the source of the problem.
The R9 resistor was badly soldered, the missing connection was on the ground side this is why I still had a visible image.