Reply To: OSSC 1.6 – Plugged in wrong PSU

NewHome Forums OSSC, OSSC Pro and DExx-vd isl OSSC – DIY Support OSSC 1.6 – Plugged in wrong PSU Reply To: OSSC 1.6 – Plugged in wrong PSU

#49671
oddz
Participant

Thanks for you reply,

I plugged in a 12V PSU. The LCD works just fine and shows no error, it reacts well to the remote controller too, channels, etc…
Not sure how to check properly if voltage regulators are shorted, they have 5 pins. I place the red of my multimeter on one pin and the black on ground, if I have continuity the component is dead, right ?