Reply To: SNES PAL 1Chip with RGB bypass VGP 4.1b

NewHome › Forums › Repairs and Upgrades › SNES PAL 1Chip with RGB bypass VGP 4.1b › Reply To: SNES PAL 1Chip with RGB bypass VGP 4.1b

November 28, 2022 at 11:38 AM #55958
TheCorfiot
Participant

    Hello There

    As replied above, you can ignore R18 being replaced due to the cable you plan to use.

    Regarding the RGB lines, it is your call tbh the vias alongside the resistors are indeed tracked to them.
    some people shy away from soldering direct to VIA’s as they can be delicate, but if you use thin enough, eg AWG30 kynar you will be fine….

    If a brightness mod is required then installers will take the rgb outs from the chip resistors and leave the vias free in order to hook up the pull down resistors required for the brightness mod

    Regarding Q3, the capacitors should really be removed

    • This reply was modified 3 years, 3 months ago by TheCorfiot.