Reply To: TMS-RGB V2 PAL Coleco

NewHome Forums Repairs and Upgrades TMS-RGB V2 PAL Coleco Reply To: TMS-RGB V2 PAL Coleco

#62505
TheCorfiot
Participant

    Installation of this type of board does really need a fine tip iron with good technical skills

    5v shorted to red indicates the red output was shorted or cabled up incorrectly causing the chip to fail.

    The soldering in general concerns me, there appears to be pcb damage to the one board near the chip leg pads…

    I assume you have insulated the rear of the board using Kapton tape to prevent short circuits to the pcb.

     

    Sometimes before starting such an install its a good idea to research it online and pickup done tips, do’s and dont’s on the way.

    But well done you got it working