Reply To: OSSC green led but nothing on the LCD display
Well, I got my hands on the usb blaster and flashed the 0.90 to the OSSC
The thing didn’t boot up, so I tried reflashing. On my third attempt I got it booted up fine. I exhaled relaxed BUT!!! when I returned the thing to my TV rerouted all the cables it catched the same symptoms again. Screen blink then solid green…
Any ideas?
UPD: Back to the workbench I hooked the JTAG, powered on, got familiar “screen flash then solid green” and after around 30 seconds of standby powered on OSSC booted up! But eventually hanged… Now I am confused.
UPD2: Sometimes verification fails sometimes not:
Info (209060): Started Programmer operation at Fri Nov 1 22:29:51 2024
Info (209016): Configuring device index 1
Info (209017): Device 1 contains JTAG ID code 0x020F20DD
Info (209007): Configuration succeeded — 1 device(s) configured
Info (19845): Start Serial Flash Loader programming
Info (209018): Device 1 silicon ID is 0x14
Info (209044): Erasing ASP configuration device(s)
Info (209023): Programming device(s)
Info (209021): Performing CRC verification on device(s)
Error (209027): Verification failed for device number 1
Info (19845): End Serial Flash Loader programming
Error (209012): Operation failed
Info (209061): Ended Programmer operation at Fri Nov 1 22:30:29 2024
