Reply To: OSSC Pro: Failed Firmware Update

NewHome › Forums › OSSC, OSSC Pro and DExx-vd isl › OSSC – Discussion and support › OSSC Pro: Failed Firmware Update › Reply To: OSSC Pro: Failed Firmware Update

November 5, 2024 at 4:33 PM #63995
JAMIEvx
Participant

    Got the USB Blaster this morning so I gave it a go. I got firmware version 0.76 working, but 0.77 will not work.

    Here’s the process I tried:

    • Disconnected everything from the OSSC Pro except for power and the USB Blaster (all AV inputs disconnected from the device, removed the Legacy AV expansion board)
    • Flashed version 0.70 to the OSSC Pro using the .jic file from GitHub. This appears to have been successful. The unit booted up and was running with 0.70.
    • Attempted to update to version 0.77 via the mciroSD card. This was, again, not successful. Same thing as before. Would never complete the update, and all LEDs and the display were off/blank.
    • Flashed version 0.70 once again using the USB Blaster.
    • Successfully updated to 0.76 using the microSD card.
    • Successfully loaded my saved profile from the microSD card.
    • Reconnected AV inputs and the Legacy AV Expansion Board.
    • Everything appears to be working now as it was before I originally tried to update to 0.77 last week.

    So, it appears 0.76 works but 0.77 doesn’t.