Reply To: OSSC 1.6 Corrupt video out

#65293
pbryd
Participant

    Finally I was able to figure out that the system worked as long as it had 3v – 4.5v.

    I posted a video on Youtube and a viewer had me check some voltages.  According to the datasheet A33VDD should be 3.3V but mine is 4.8V when I’m powering the system with 5V.

    So I have ordered a replacment for U6 which is a TLV70033. Hopefully that will bring the 5V back down to 3..3V.

    Then I’ll need a replacement on /off switch and a new button1 (mine isn’t working).

    My video is here. https://youtu.be/gucZr2RgDvo