Reply To: [SOLVED] No Sync after attempting 1.00 bodge wire on 1.6 hardware

NewHome Forums OSSC, OSSC Pro and DExx-vd isl OSSC – Discussion and support [SOLVED] No Sync after attempting 1.00 bodge wire on 1.6 hardware Reply To: [SOLVED] No Sync after attempting 1.00 bodge wire on 1.6 hardware

#66675
bobrocks95
Participant

    Good point- things look perfectly fine with PS1, PC Engine, and dejittered Famicom.  This is again back on firmware 0.90 with the wire still installed.

     

    No shorts apparent on the resistor side between any of the 4 pads.