VideoGamePerfection.com | Sestain | Activity

Sestain started the topic OSSC Pro PS3 HDMI Support in the forum OSSC - Discussion and support

Fri, 29 Aug 2025 16:20:17 +0100

Using firmware 0.76 I get an image through OSSC Pro but on firmwares 0.77 to 0.79 I get a black screen.

Sestain replied to the topic OSSC Pro: THS7353 init fail - error code: 1 in the forum OSSC - Discussion and support

Mon, 30 Sep 2024 19:37:46 +0100

It has been doing the THS7353 init fail Error code: 1 now a lot when turning off while no signal. Also it gets stuck on this sometimes so replugging power doesn’t always fix it, and requires multiple attempts. Today got this and it froze like this until power was replugged, I guess this unit needs to be replaced. Other than that it works just fine.

Sestain started the topic OSSC Pro: THS7353 init fail - error code: 1 in the forum OSSC - Discussion and support

Fri, 13 Sep 2024 23:44:09 +0100

I pressed the power button on the remote, and instead of powering off, it froze onto saying “THS7353 init fail Error code: 1” and I had to replug the power cable.

Sestain replied to the topic OSSC: PS2 DVDPAL mode not syncing in the forum OSSC - Discussion and support

Fri, 12 Jul 2024 15:25:05 +0100

Just tested with 0.90a and the video mode synced just fine, it was green on RGBS and RGsB but on YPbPr it was correct.

Sestain replied to the topic OSSC: PS2 DVDPAL mode not syncing in the forum OSSC - Discussion and support

Thu, 11 Jul 2024 08:13:42 +0100

I will test 0.90 fw tomorrow when I get home from military, to see if it’s just the 1.xx making the issue happen. I don’t use my PS2 that often for DVD playback anyways because I have PS3 and PS4.

Sestain replied to the topic OSSC: PS2 DVDPAL mode not syncing in the forum OSSC - Discussion and support

Tue, 09 Jul 2024 19:29:33 +0100

I tried a DVD player which was working fine with everything else but one DVD which would make the same issue as on PS2 DVDPAL mode, after selecting language and watching through the copyright screen. And in the past with my scart cable and OSSC I could just switch the mode to RGsB I think and it fixed the screen being green (iirc)

Sestain replied to the topic OSSC: PS2 DVDPAL mode not syncing in the forum OSSC - Discussion and support

Mon, 08 Jul 2024 11:01:58 +0100

Yes, playing DVDs on PS2, it seems to be a different video compared to bios. PS2 testmode has resolution switching and every resolution other than DVDPAL is working

Sestain started the topic OSSC: PS2 DVDPAL mode not syncing in the forum OSSC - Discussion and support

Sun, 07 Jul 2024 21:16:50 +0100

I did the mod on my 1.6 revision OSSC and installed 1.10a. Noticed that my PS2 outputting PAL through scart is fine but when switching to DVDPAL, it shows on the mini screen that it’s rapidly changing and nothing shows up on screen.

Sestain replied to the topic OG Xbox Optimal Timings (PAL/NTSC) in the forum OSSC - Discussion and support

Mon, 18 Dec 2023 22:30:09 +0000

It was obvious that PAL and NTSC has different colors but NTSC-M and NTSC-J has difference in colors too.

Sestain replied to the topic OG Xbox Optimal Timings (PAL/NTSC) in the forum OSSC - Discussion and support

Sun, 17 Dec 2023 14:55:38 +0000

480i and 480p uses same H. Samplerate but needs different phase

Sestain replied to the topic OG Xbox Optimal Timings (PAL/NTSC) in the forum OSSC - Discussion and support

Fri, 15 Dec 2023 19:31:40 +0000

I created a UnleashX skin that draws vertical lines and used that to get H. samplerate close to correct, later calculated correct, and then used the skin to set the sampling phase closer to optimal.

Sestain replied to the topic OSSC signal randomly dropping in the forum OSSC - Discussion and support

Sun, 10 Dec 2023 21:16:01 +0000

What mode are you using on the 240p/288p PC? Set that LineX mode to 320×240 optim, since Rayman 1 is 320×240.
With Line5x mode, I use Line5x format on 1600×1200 for a 4:3 aspect ratio.
If you are still having issues, you could try lowering LineX if you still encounter issues with my timings.

My timings for 320×240 (NTSC PS1) on PS2:
H.…Read more

Sestain replied to the topic OG Xbox Optimal Timings (PAL/NTSC) in the forum OSSC - Discussion and support

Sat, 09 Dec 2023 02:38:16 +0000

Seems like I was doing something wrong the last time I checked my NTSC timings, thanks.

Sestain started the topic OG Xbox Optimal Timings (PAL/NTSC) in the forum OSSC - Discussion and support

Sat, 09 Dec 2023 00:59:34 +0000

This was made on 0.89/0.90 firmware (Still haven’t done the hardware modification for 1.0x firmware).
I use RGB Scart cable and my xbox is 1.4 revision (PAL).

Allow TVP HPLL2x: Off
Allow upscample2x: On (I need to have this turned on in order to get an image to my capture card or screen)

480i:
H. samplerate: 793.00
H. synclen: 62
H. backporch:…Read more

Sestain replied to the topic Capture card compatibility report thread in the forum OSSC - Discussion and support

Thu, 07 Dec 2023 22:25:59 +0000

Capture card: Elgato HD60 Pro

Working just fine with my OSSC on firmware 0.89.

Consoles (Resolutions): through RGB Scart cable.

OG Xbox: 480i, 576i (Line4x)

PS2: 240p, 288p, 480i, 480p, 576i, 576p, 720p, 1080i (VGA resolutions with weird HZ too) (Line5x, Line4x)

PS3: 576i, 720p, 1080i, 1080p (I think 576p was a thing and working)