Reply To: OSSC stays dead when powered up

NewHome › Forums › OSSC & OSSC Pro › OSSC – DIY Support › OSSC stays dead when powered up › Reply To: OSSC stays dead when powered up

April 15, 2017 at 3:36 PM #12403
AetherSmith
Participant

@zugspitzjockl Are you sure things are okay with the power? At least on my build, the LCD backlight would still light as long as it was getting power, regardless of whether it was getting any commands from the FPGA.


@LazyEpic Is there any behavior from the LEDs?

I was thinking that the chip from my kit was missing its firmware for a while, but it turned out to be an almost imperceptible short to ground on one of the QFPs.