Reply To: Hybrid Scanlines

#20180
paulb_nl
Participant

    @Fnnrqwin Did your NES/SNES work properly with the firmware that had glitches in lineX5 mode? If you normally use the non-audio firmware then you should set TX mode to DVI because its set to HDMI by default on the audio firmware.

    Here are firmware builds from the latest code of Marqs. Please try it out.
    https://drive.google.com/file/d/18FladboTv64w5KxXwlphjwypVmZur-a9/view?usp=sharing