Update : Board isn’t bricked. The voltages are perfect and even with the lights off, the FPGA is programmable. The 27Mhx clock was incorrectly rotated 90 degrees to the left. I fitted a new Clock Oscillator. At this point, the RED led comes on same as before, and then goes out, and now the LCD backlight stays lit. Still nothing on the screen via HDMI and nothing on the LCD.
I am thinking at this point that I have a bridge somewhere, but I can’t find any with a microscope. Maybe the NOR flash is not feeding the FPGA on boot.
In order to debug this, would hooking it up to UART with a debug build so that I can see debug output help?