NewHome › Forums › OSSC, OSSC Pro and DExx-vd isl › OSSC – Discussion and support › OSSC won't sync with Taito Arkanoid 2 JAMMA arcade pcb :( › Reply To: OSSC won't sync with Taito Arkanoid 2 JAMMA arcade pcb :(
Thanks for the reply marqs!
So I have good news and bad news…
The good news is that using AV1 worked! I have one of the JAMMA/scart adapters so I plugged that into my cabinet and I was able to get an image once I cranked up the vsync threshold! So that was great to see.
The bad news is that I seem to be getting some stuttering/dropped frames.
Here is a video I recorded through OBS. https://youtu.be/eLY1hhYI7Gk
It’s most noticeable during the scrolling text beginning at 0:12, again at 1:21 and again at 2:03. I’m not sure how to correct this. I’ve tried all of the different line modes (2x,3x,4x,5x) and it doesn’t seem to make a difference.
Quick note: This is a vertical game so the video is rotated 90 degrees. Just FYI.
Also, any recommendations on a VGA to SCART cable/converter? I eventually want to be using my Splitfire again which outputs via VGA, so I need to convert that to SCART so I can use AV1