Reply To: OSSC won't sync with Taito Arkanoid 2 JAMMA arcade pcb :(

NewHome Forums OSSC & OSSC Pro OSSC – Discussion and support OSSC won't sync with Taito Arkanoid 2 JAMMA arcade pcb :( Reply To: OSSC won't sync with Taito Arkanoid 2 JAMMA arcade pcb :(

#25559
jimbodeanny
Participant

Thanks for the responses!

The OSSC LCD will tell you what kind of signal it’s receiving. Specifically, the i or p immediately following the line count will tell you whether it’s receiving an interlaced or progressive signal respectively.

Ok, I just checked the input signal and it’s 264p so that rules out the interlace theory I think.

Also, if the framerate of the board is very far from standard 50hz/60hz, stuttering may be caused by framerate conversion performed by your card/TV. Try setting your capture to the exact framerate the OSSC reports.
Otherwise, I wouldn’t rule out it’s still some type of sync issue.

It’s a standard 60hz signal. The OSSC reads it at 59.18Hz.