Reply To: OSSC won't sync with Taito Arkanoid 2 JAMMA arcade pcb :(

NewHome Forums OSSC & OSSC Pro OSSC – Discussion and support OSSC won't sync with Taito Arkanoid 2 JAMMA arcade pcb :( Reply To: OSSC won't sync with Taito Arkanoid 2 JAMMA arcade pcb :(

#25562
jimbodeanny
Participant

Okay, so I tested out a few other sources that haven’t given me issues.

My Toki pcb is detected as 259p, 60.32Hz. It’s the same whether I connect it via AV1 or AV3

My arcade test pattern generator is detected at 262p, 60.33Hz. This is connected via AV3.

My Ms. Pacman pcb is detected at 264p, 60.55Hz. This is connected via AV3.

Since Ms Pacman is also detected at 264p, I’m wondering if maybe it’s the frequency? If I plug my Arkanoid: Revenge of DOH pcb into AV3, it never completely sync, but I see the numbers rapidly change, ranging from roughly 259p – 265p.

I don’t know what this all means.

I’m not sure where to go from here. Any thoughts or help are appreciated!