Reply To: Trying to make OSSC work with MDA-ish video — won’t sync?

NewHome › Forums › OSSC, OSSC Pro and DExx-vd isl › OSSC – Discussion and support › Trying to make OSSC work with MDA-ish video — won’t sync? › Reply To: Trying to make OSSC work with MDA-ish video — won’t sync?

April 28, 2022 at 10:07 PM #53119
david.given
Participant

    Yes. Yes it does. Syncing the hsync with the vsync produces a much more stable output. Again, it’s not right. The best I came up with was this: https://imgur.com/a/Asfinbp But my monitor is still very unhappy, showing an image offset a long way to one side, and the pixels aren’t being sampled properly.

    I don’t know the pixel clock for this thing but each scanline is 91×8 = 728 pixels. So… about 740 samples per line, adding padding for front porch and back porch? I’ve tried it, and it’s no better.

    Also, and this is a minor issue because I can easily fix it in post, but is there a way to change the aspect ratio? This thing has a 25:10 monitor…