Reply To: Accidentally plugged in to a 12v adapter, won’t boot

NewHome Forums OSSC, OSSC Pro and DExx-vd isl OSSC – DIY & Repair Support Accidentally plugged in to a 12v adapter, won’t boot Reply To: Accidentally plugged in to a 12v adapter, won’t boot

#56178
Morpheus_79
Participant

    It’s hard to tell… cause most of the ICs and a lot of filtering caps are connected to the IOVDD line:

    Top

    Bottom

    You can try to remove U4… maybe U8… and all the filtering caps connected to IOVDD and GND… before removing the bigger ICs. If you have the opportunity to borrow a heat cam, you could try to induce some low voltage into the IOVDD line and check for heat spots.