Reply To: OSSC v1.xx series beta firmware

#61816
manuelink64
Participant

    what mod is the better one?

    – The 1st one, removing SMD resistor R35 and adding a wire between TVP7002 pin 25 (last on the side) and FPGA-end pad of the removed resistor.

    – the 2nd, solder a thin enameled wire between pin 25 of U1 and pin 46 of U2.

    – the 3rd, rewire the connections between U1 and U2 on an OSSC 1.6 to match the connections on an OSSC 1.8.

     

    I can perform all of them, but the 3rd looks more interesting, because the red led is still working.