Reply To: OSSC v1.xx series beta firmware
NewHome › Forums › OSSC, OSSC Pro and DExx-vd isl › OSSC – Discussion and support › OSSC v1.xx series beta firmware › Reply To: OSSC v1.xx series beta firmware
the images of the amazing soldering job by @morpheus_79 doesn’t show the pin 126 lifted, and why he (re)connected the pin 127 to ground?
Because i (wrongfully) cut the trace to ground from the pad for pin 127 (there was a fault in the schematics which is now corrected). So i had to reconnect the pin/pad with the ground plane (i’m not THAT happy with this solution… but since i had to bend some of the legs a couple of times to cut the traces underneath, they were already getting kind of fragile -> i thought it would be to risky to bend them once more for reconnecting the trace underneath the legs, so i did what i did).
Pin 126 isn’t lifted, because its trace to ground is cut too 😉 .
