Colour issue using my new OSSC Pro with a DOS PC – no problem with OSSC v1.8

NewHome › Forums › OSSC, OSSC Pro and DExx-vd isl › OSSC – Discussion and support › Colour issue using my new OSSC Pro with a DOS PC – no problem with OSSC v1.8

Tagged: ,

Viewing 6 posts - 16 through 21 (of 21 total)
1 2
  • Author
    Posts
  • January 28, 2025 at 7:31 PM #64840
    BuckoA51
    Keymaster

      Do you have a VGA cable where pin 4 is tied to ground?

      January 28, 2025 at 9:10 PM #64842
      Merkurio
      Participant

        Hi back BuckoA51,

        No, my both VGA-cables I own, pin 4 not tied to ground

        January 28, 2025 at 10:21 PM #64844
        marqs
        Participant

          It was not entirely clear from the previous answer if pin 4 in your cables was connected (to the same pin on other end) or not connected at all as listed in the picture. If you have a cable with pin 4 floating, then both Classic and Pro should appear the same way to the source.

          January 28, 2025 at 10:56 PM #64847
          Merkurio
          Participant

            Hi back marqs,

            Yes, pins 4 on both sides of the cable are connected together. And Pin 4 is NOT connected to GND (pin 5). Only pins 6, 7 & 9 are connected together.

            January 28, 2025 at 11:00 PM #64848
            Merkurio
            Participant

              … I posted the picture just for numeration of the pins, I refered to.

              January 28, 2025 at 11:02 PM #64849
              Merkurio
              Participant

                … sorry correction to #64847: Only pins 6, 7 & 8 are connected together.

              • Author
                Posts
              Viewing 6 posts - 16 through 21 (of 21 total)
              1 2
              • You must be logged in to reply to this topic.