Connecting Multiple Inputs To Koryuu With A Switcher

NewHome › Forums › Koryuu Transcoder › Connecting Multiple Inputs To Koryuu With A Switcher

Tagged: 

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • September 7, 2020 at 9:58 PM #41264
    90sGamer
    Participant

      So I have multiple composite/s-video systems I am trying to run through my OSSC via the Koryuu. I am wondering if it is possible to run a switcher to the Koryuu instead of a single console. I have a Pelican composite/s-video switcher, as well as a gcompsw component switcher (which also accepts a composite input) at my disposal. If that works, then there are the red/white RCA audio inputs left to deal with, since the Koryuu only accepts video inputs, and since the two switchers are already connected directly to the OSSC, would those just simply remain plugged into the switchers? Thanks for any help!

      September 10, 2020 at 3:18 PM #41291
      megari
      Participant

        Hi!

        I do not see any fundamental issue that would prevent using a switcher, provided excessive noise is not introduced. If the Koryuu is outputting video to the OSSC, the audio inputs can remain connected to the OSSC.

      • Author
        Posts
      Viewing 2 posts - 1 through 2 (of 2 total)
      • You must be logged in to reply to this topic.