Invalid Disc Image while trying to Firmware Update

NewHome › Forums › OSSC, OSSC Pro and DExx-vd isl › OSSC – Discussion and support › Invalid Disc Image while trying to Firmware Update

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • July 15, 2016 at 10:36 PM #7940
    Hak
    Participant

      Tried multiple Micro sd cards all 1 gb and 2 gb. I also tried .69 and .70 but every time I try to update I get invalid disk image. This is a DIY kit

      July 16, 2016 at 11:13 AM #7957
      paulb_nl
      Participant

        Invalid image means the “OSSC” header is missing. Are you writing the bin file as raw image to your sdcard?

        July 16, 2016 at 8:21 PM #7973
        Hak
        Participant

          yeah using win 32 disk imager

          July 18, 2016 at 8:32 PM #8003
          BuckoA51
          Keymaster

            Weird, have you tried a different firmware just to be sure?

            July 20, 2016 at 3:16 PM #8039
            marqs
            Participant

              That being a DIY kit, I’d check connections from SD socket to FPGA (including pull-up resistors on the way). “Invalid image” means that card is detected but data read from it doesn’t match a fw image.

            • Author
              Posts
            Viewing 5 posts - 1 through 5 (of 5 total)
            • You must be logged in to reply to this topic.