Loose scart connector going to be future problem?

NewHome › Forums › OSSC, OSSC Pro and DExx-vd isl › OSSC – Discussion and support › Loose scart connector going to be future problem?

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 21, 2019 at 12:32 AM #27080
    Paranoid_Andy
    Participant

      Hey all.

      I made a quick video to show a possible issue I’m having and I’m just concerned about it. The scart connector on my OSSC seems to be somewhat loose compared to my original OSSC. This new one has some wobble to it whereas my original didn’t budge. Both were purchased from VGP.

      Here’s the video showing what I am talking about.

      Will this be an issue?

      Thanks!

      July 21, 2019 at 9:52 PM #27094
      BuckoA51
      Keymaster

        Not aware of any issues with AV1 on the latest batch and haven’t had any complaints, I’d say return it if you’re worried.

        October 14, 2025 at 11:41 AM #67455
        LeeVega
        Participant

          old post but i was looking for some kind of solution and i found this. my OSSC Pro is doing this right now my Scart connector moves up and down i don’t know why this would happen the box sits in one spot, i get blue and green color bleed its ridiculous, if i jar a piece of rubber or cloth under the RGB cable Scart head connection, the picture is stable, any help and recommendations? i would be extremely grateful, thank you.

          (using retro access cables)

          • This reply was modified 3 weeks, 4 days ago by LeeVega.
        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.