Loosing Sync Sega Saturn (PALM Brasil) with Retrogaming Cables Component

NewHome › Forums › OSSC, OSSC Pro and DExx-vd isl › OSSC – Discussion and support › Loosing Sync Sega Saturn (PALM Brasil) with Retrogaming Cables Component

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • November 25, 2022 at 9:37 PM #55938
    cleitonspindola
    Participant

      Guys, I’m having difficulties with ossc and sega saturno palm (brazil) with component cables from retrogaming cables.
      When entering some 525i resolution (some game menus) the screen is black and I can’t see it.
      I’ve tried several configuration setups and I can’t solve it, can anyone have any information?

      November 26, 2022 at 1:28 PM #55943
      BuckoA51
      Keymaster

        What does the LCD on OSSC say when you send interlace from the Saturn?

        November 28, 2022 at 5:33 PM #55961
        cleitonspindola
        Participant

          Just information (AV2_YPbPr 525-i 15.71kHz 59,87Hz)

          November 28, 2022 at 7:41 PM #55963
          marqs
          Participant

            1. Is the red LED on while in that mode?
            2. Which processing mode is in effect (Output opt. -> 480i/576i proc)?
            3. Which display you are using, and you tried another?

            November 29, 2022 at 9:47 PM #55979
            cleitonspindola
            Participant

              Hello Marcs.

              1 – yes, red led a few seconds.
              2 – using passthru in 480i/576i
              3 – i’m using LG 4K OLED C1 and ossc firmware 0.90. Its only display to use at moment.

              November 29, 2022 at 10:37 PM #55980
              marqs
              Participant

                Perhaps you could try if 480i/576i Line2x mode works. Not sure why passthru wouldn’t work, though – LG OLEDs should support a wide range of modes. Does interlace passthru work with other machines?

              • Author
                Posts
              Viewing 6 posts - 1 through 6 (of 6 total)
              • You must be logged in to reply to this topic.