Manual Selection of Input Profile

NewHome › Forums › OSSC, OSSC Pro and DExx-vd isl › OSSC – Feature Requests › Manual Selection of Input Profile

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 22, 2020 at 11:34 AM #35681
    uchristo
    Participant

      It would be great to manually select which input Profile to choose.
      In this Topic, I’ve got an linedoubled 313lines Input. The non linedoubled Input is correctly detected as 240p/288p which can be lx4’ed. The linedoubled 626p-Input is detected as 800×600, but it should be 480p/576p.
      Is it possible to add an override-option for manual selection?

      February 22, 2020 at 5:23 PM #35689
      nmalinoski
      Participant

        You can already manually select your profile with the remote by hitting the 10+ button once or twice and using 0-9 to select the corresponding profile. Pressing 10+ once lets you select from profiles 0-9, and pressing it again lets you select from profiles 10-15. This is detailed in the OSSC manual, under Basic Usage > Remote Control.

        February 22, 2020 at 8:46 PM #35692
        uchristo
        Participant

          That’s the profile to control the settings for the selected input. I’m aware of this. But I wan’t to change the mode of the input! 626p should be treated as 480p/576p rather than 800×600.

          February 23, 2020 at 4:42 PM #35705
          nmalinoski
          Participant

            If 626p is being incorrectly treated as 800×600, instead of being treated as 625p (576p), then I’d say that’s a bug and should be reported as such.

          • Author
            Posts
          Viewing 4 posts - 1 through 4 (of 4 total)
          • You must be logged in to reply to this topic.