[Newbe] N64 NUS-001 (FRA)/Gamecube – signal drops

NewHome Forums OSSC, OSSC Pro and DExx-vd isl OSSC – Discussion and support [Newbe] N64 NUS-001 (FRA)/Gamecube – signal drops

Tagged: 

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #35767
    ovoxRubenxovo
    Participant

      Hi,

      yesterday i connected my N64 NUS-001 (FRA) “modded” console via. RGB cable to my OSSC.
      First I tried the x5 Mode but the image height is too much (10% cut off on the top and bottom of the screen).
      Then i tried the x2 Mode … the first image was flawless, perfect fitting on my TV (Samsung Q84R 4k) … aaaaaaand it’s gone.

      As soon as i use the x2 mode the image stays for ~4-5 seconds and then the signal drops (black screen, no sound), the signal returns after 1-2 seconds but then it drops again and so on.
      The indicator light on the ossc stays green. I tried the console and cable on a older tv and it worked (ugly af but worked).

      The same problem is with my Gamecube but not so often, maybe once every 1-2 minutes.
      Also with some games the ossc dosn’t get any signal from the n64?!? (e.g. Mario 64 or Majoras Mask)
      What settings do I need for the N64?

      Thanks

      #35770
      BuckoA51
      Keymaster

        Who did the mod on your N64 and what kind of mod is it do you know?

        #35773
        Harrumph
        Participant

          Are you using quality cables or some junk off ebay?

          #35774
          ovoxRubenxovo
          Participant
            #35804
            Harrumph
            Participant

              Clearly mediocre quality, apparent from the reviews. I’d recommend cables from retrogamingcables.co.uk instead.

            Viewing 5 posts - 1 through 5 (of 5 total)
            • You must be logged in to reply to this topic.