OSSC – Failure to import profiles

NewHome › Forums › OSSC, OSSC Pro and DExx-vd isl › OSSC – Discussion and support › OSSC – Failure to import profiles

Tagged: ,

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • January 30, 2025 at 4:00 PM #64865
    Total Eclipse
    Participant

      I’ve upgraded the firmware of my modified v1.7 from 1.09 to 1.11, however despite using the web converter to upgrade my profile settings to a v1.11 format, the OSSC refuses to import the profile back again.

      All I get is a message “0 slots loaded”

       

      Even if I insert a freshly formatted SD card into the OSSC on v1.11, select “Export settings”, and then “Import settings”, I get the same error.

       

      Swapping back to FW 1.09 and attempting to import the previously exported settings also has the same issue.  I’ve also tried different SD cards in case that was a factor.

       

      It feels like I’m missing something obvious, but I don’t know what.

       

      January 31, 2025 at 1:28 PM #64879
      marqs
      Participant

        You need to write the profile to SD card in raw mode same way as the firmware.

      • Author
        Posts
      Viewing 2 posts - 1 through 2 (of 2 total)
      • You must be logged in to reply to this topic.