Ossc no sound hdmi

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #43002
    Liamdrich86
    Participant

      Apologies if this has been asked hundreds of times.

      I just bought a ossc it’s 1.6 model with hdmi, updated recently to latest 0.88a firmware, I simply get no sound.

      Setup is straight forward either PS2 or Dreamcast scart into the ossc and hdmi to TV,

      I checked the tx settings and that was correct and set to hdmi RGB

      I don’t have a 3.5m jack on TV but when I plug headphones into the 3.5m jack I get sound playing.

      I have swapped over the hdmi cable as well.

      Any ideas to help?

      Many thanks

      #43073
      BuckoA51
      Keymaster

        Could you try a different TV?

        #43075
        Harrumph
        Participant

          Could be a solder issue I guess on the contacts to audio chip. But I don’t know how one would check that. You can always return it if it’s on warranty still.

          #43096
          Liamdrich86
          Participant

            Have already tried another TV and same issue no audio.

            #43097
            Liamdrich86
            Participant

              Sadly it was bought 2nd hand so no warranty

              #43106
              Harrumph
              Participant

                Did you verify it is a 1.6 model (in case the previous owner was mistaken)?

                #43113
                Liamdrich86
                Participant

                  Def 1.6 older versions didn’t have hdmi model did they? Sticker on bottom of the device itself says 1.6 as well.

                  #43123
                  Harrumph
                  Participant

                    Oh right, I mixed up when they switched from DVI-D, sorry.

                  Viewing 8 posts - 1 through 8 (of 8 total)
                  • You must be logged in to reply to this topic.