OSSC Power cuts out, resets repeatedly

NewHome › Forums › OSSC, OSSC Pro and DExx-vd isl › OSSC – DIY & Repair Support › OSSC Power cuts out, resets repeatedly

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • April 3, 2025 at 11:05 AM #65592
    Jonnypanic
    Participant

      Hi,

      My OSSC 1.7 is constantly resetting. Sometimes if I leave it for a while and try again, it will work temporarily (about 30 mins) before shutting down and again getting stuck in what I think is a boot loop.

      It had worked fine since November when I got it, and only started doing this recently.

      I have tried changing the power supply to a usb barrel adapter and phone charger, and tried 3 different phone chargers, they all have the same issue as the original power supply.

      My OSSC is a generic Chinese one I bought on Amazon.

      I guess it could be an internal loose connection? Can anyone point me in the right direction, what should I be looking for?

      Thanks,

      JP

      April 5, 2025 at 9:15 AM #65614
      marqs
      Participant

        Sounds like cold solder joint or overheating. Resoldering all FPGA pins and/or adding better ventilation could help.

      • Author
        Posts
      Viewing 2 posts - 1 through 2 (of 2 total)
      • You must be logged in to reply to this topic.