OSSC Pro detecting PS3 as 90hz?

NewHome › Forums › OSSC, OSSC Pro and DExx-vd isl › OSSC – Discussion and support › OSSC Pro detecting PS3 as 90hz?

Tagged: ,

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 15, 2023 at 9:43 PM #58902
    BuckoA51
    Keymaster

      Sat down to try some PS3 scaling tonight and noticed something strange, OSSC Pro seems to detect my PS3 Slim as outputting 90hz (89.91).

      This means it refuses to frame lock in scaler mode. In line multiplier mode it works, but still shows 89.91 hz on the information screen.

      Any ideas?

      90hz can't be right?

      November 24, 2023 at 8:19 PM #59113
      marqs
      Participant

        Vertical frequency is exactly 1.5x so I suspect your source sends Deepcolor (36bit) instead of normal 24bit. I should probably disable Deepcolor bit in EDID since the receiver anyway would convert it to 24bit.

        November 25, 2023 at 2:22 PM #59137
        BuckoA51
        Keymaster

          I can confirm turning deep colour off solves the issue, I have to turn deep colour off on the PS3 and also power cycle the OSSC Pro.

          • This reply was modified 1 year, 7 months ago by BuckoA51.
        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.