OSSC Pro : P.LOAD and default profile option

NewHome › Forums › OSSC, OSSC Pro and DExx-vd isl › OSSC – Feature Requests › OSSC Pro : P.LOAD and default profile option

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • January 14, 2024 at 1:57 PM #59879
    onthewaveagain
    Participant

      P.LOAD profile list does not display on OSSC Pro OLED screen. Could the profile navigation menu be replicated on the OSSC OLED screen ?

      Also, could we have an option for Default profile : [Slot 0], [Last slot] ?

      January 16, 2024 at 5:22 PM #59918
      BuckoA51
      Keymaster

        Not sure what you mean, profile names display on the OLED for me if you set the text file up on your SD card.

        January 16, 2024 at 6:38 PM #59919
        onthewaveagain
        Participant

          I mean you can’t navigate the P.LOAD menu from the OSSC OLED screen (even when profiles are named with the text file), it is only possible via OSD.

          January 16, 2024 at 6:57 PM #59921
          BuckoA51
          Keymaster

            You can navigate it with left/right controls on the OLED, I don’t see how this could be improved, there’s only two lines on the OLED character display?

            January 16, 2024 at 7:22 PM #59922
            onthewaveagain
            Participant

              Let me try to explain.

              Usually when you navigate the OSSC menu on the OSD, the current menu item is also displayed on the OLED screen.

              eg. if you press MENU on the remote, you get the Menu on OSD and the current menu item on the OLED.

              Now, if you press P.LOAD on the remote, you do not get that. the P.LOAD menu is not giving any feedback on the OLED.

              Is that clearer ?

              January 17, 2024 at 9:42 AM #59925
              BuckoA51
              Keymaster

                Oh you mean the profile load button on the remote, now that makes sense, yeah I just tried that and I agree that should change the OLED to give some visual feedback and it doesn’t.

                 

                January 18, 2024 at 9:37 PM #59947
                onthewaveagain
                Participant

                  Yes that would be nice if that could be fixed.

                  Also with this menu I have noticed something strange. If you load a profile where output resolution and/or output is different from the current configuration, the OLED display does not refresh before you exit the OSD menu even though OSD gives a “OK” feedback.

                  Think Marq should decide whether we have OLED displaying P>LOAD menu current item or properly refresh output info when a new profile is loaded.

                • Author
                  Posts
                Viewing 7 posts - 1 through 7 (of 7 total)
                • You must be logged in to reply to this topic.