OSSC PS2 Component black or green

NewHome › Forums › OSSC, OSSC Pro and DExx-vd isl › OSSC – Discussion and support › OSSC PS2 Component black or green

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • March 9, 2021 at 6:04 PM #45750
    gumcrepe
    Participant

      As title says I tried hooking up my ps2 earlier and on #2 its grey only, for 5 its green instead. Im using an OEM ps2 component cable that I’ve tested confirmed works and I’d like to mention Im not well versed in this so any help would be greatly appreciated! Thank you!

      March 10, 2021 at 7:26 AM #45757
      GlueyPorchBoy
      Participant

        Unclear on what you mean by “#2” and “#5,” but usually if you’re only getting grayscales or a single color, that means it’s not getting all three parts of the component signal – is everything connected correctly (make sure you didn’t mix up the red connector and the right audio channel), and is your PS2 set to “Y Cb/Pb Cr/Pr?” Also make sure it’s a good connection on the PS2 end as well as the OSSC end, sometimes you can end up with color problems if it’s a little loose.

      • Author
        Posts
      Viewing 2 posts - 1 through 2 (of 2 total)
      • You must be logged in to reply to this topic.