Philips CDi 470 RGB mod

[AlexS]

We installed the RGB board in a Philips CDi 470, however composite/YC doesn’t turn off and RGB mode isn’t activated. It should be done with pin 14 but it doesn’t work. Any ideas? Thanks for your help

• This topic was modified 1 year, 7 months ago by BuckoA51.

[BuckoA51]

I asked Chris from Mobius Strip Tech, he asked “did you remove resistor 3171 from the bottom of the CDi main board” ?

[AlexS]

Thanks, we did this one as well, according to the manual. We really don’t know anymore what to do

[BuckoA51]

Can you post up some pictures of your install?

[AlexS]

[AlexS]

1. 

[AlexS]

[AlexS]

[AlexS]

<p style=”text-align: left;”></p>

[AlexS]

[AlexS]

[AlexS]

<p style=”text-align: left;”></p>

[AlexS]

1. 

[AlexS]

thank you for your help. If you need more pics just tell me

[BuckoA51]

I sent your pictures over to Chris at Mobius he said the following:-

They didn’t bridge the jumpers for RGB on the RGB board. It’s not in my instructions but it’s on the GitHub page, because when I was selling the boards, the jumpers didn’t exist

https://github.com/mobiusstriptech/CD-i-RGB

They also don’t need to solder the RGB enable pad because they moved the resistor on the mainboard

• This reply was modified 1 year, 7 months ago by BuckoA51.

[Author]

Posts