Picure very dark

NewHome › Forums › OSSC, OSSC Pro and DExx-vd isl › OSSC – Discussion and support › Picure very dark

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • June 20, 2024 at 10:08 AM #61995
    t.rudolph
    Participant

      Dear all,

      I´m using OSSC (firmware 1.09) to connect my Amiga500 using an RGB-to-SCART cable (https://www.retro-kabel.de/p/amiga-monitor-tv-scartkabel-rgb-high-quality) through AV1 RGBS to my monitor (ASUS ProArt PA248QV).

      Unfortunately the picture on the monitor is very dark. I played around with the monitor settings, increased brightness to the max etc. but it didn´t really help.

      Does anyone have an idea, if there are any settings within OSSC that I could try to tweak?

       

      Best regards,

      Tobias

      June 20, 2024 at 10:18 AM #61996
      BuckoA51
      Keymaster

        Do you have means to test the Amiga on another display and/or without the OSSC? We need to figure out if this is a problem with the monitor, the cable, the Amiga or the OSSC, but there is not any issue with OSSC and Amiga screen brightness that I’m aware of.

        June 21, 2024 at 9:08 AM #62015
        t.rudolph
        Participant

          Unfortunately I don´t have any other possibility to test this.

          However I´m using the same monitor to connect my C64 using OSSC + Koryuu and here I don´t have the problem of too dark picture.

          So I´d rule out the monitor at least.

          Is there any OSSC setting/parameter that you could perhaps recommend to twiddle around with? I´m using the Passthru mode.

          I´ve just updated firmware to 1.10, but no difference.

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.