RetroTink 2X SCART – 480p passthrough with Dreamcast

NewHome › Forums › RetroTink Products › RetroTink 2X SCART – 480p passthrough with Dreamcast

Tagged: , , ,

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • May 7, 2021 at 7:33 PM #47216
    twyborg
    Participant

      I’m running a PAL Dreamcast through a Toro box into a Hydra 2, which is outputting SCART to both a JVC DT-V1910CG CRT (with a SCART>BNC cable from RetroGamingCables) and a computer monitor (Samsung CRG90) via the RetroTink 2X SCART.

      The CRT syncs straight up with no problems, picks up the signal as 480/60p but there’s no picture picked up on the PC monitor. When I turn the Dreamcast on, the RetroTink LED goes from solid green to flashing colours. I can’t find any information on the flashing LEDs.

      I also have an NTSC N64 plugged into the Hydra – the RetroTink picks it up fine on both the CRT and computer monitor. I’m aware that some TVs/Monitors just don’t agree with some consoles going through the RetroTink – hell, I’m not even sure if it’s designed to passthrough 480p to begin with. Has anyone used a Dreamcast -> Toro box -> RetroTink 2X SCART?

      May 17, 2021 at 4:23 PM #47417
      BuckoA51
      Keymaster

        I’m afraid 480p passthrough isn’t supported on the 2X SCART.

      • Author
        Posts
      Viewing 2 posts - 1 through 2 (of 2 total)
      • The forum ‘RetroTink Products’ is closed to new topics and replies.