Screen flickers Green when lifting front left of the CPS2 A board

NewHome › Forums › CPS2 digital AV interface › Screen flickers Green when lifting front left of the CPS2 A board

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • May 18, 2020 at 8:30 PM #37980
    dannahan
    Participant

      Here’s my cps2 digital av issue.

      The video glitches to mostly green when lifting the cps2. Not sure why though. You can see me lift the other corners and they’re all fine. I had clips on it and it still had issues.

      Here are pictures of my wiring/soldering

      CPS2 Digital AV Wiring

      May 27, 2020 at 3:46 PM #38261
      marqs
      Participant

        Lifting the edge probably severs the contact between the pin header and socket which holds the mod board in place. The sockets in your installation seem to be of the short type which might make them slightly more prone to the issue – the kits sold by VGP should include taller versions (BCS-105-L-D-PE-BE) nowadays. You could try slightly bending the pin headers towards sides and then re-seating the mod board. If that doesn’t help and the issue is a bother, a certain fix is to solder wires from the pin header tops to the socket legs on the mod board.

      • Author
        Posts
      Viewing 2 posts - 1 through 2 (of 2 total)
      • You must be logged in to reply to this topic.