Snes 1chip SuperCic issue

NewHome Forums Repairs and Upgrades Snes 1chip SuperCic issue

Tagged: 

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #14910
    nobita
    Participant

      I just installed supercic in my pal snes 1 chip. I do it following carefully the instruccions. I take care with all connections to not make any misstake…Finally I check it on my sony crt trinitron but I doens’t works. I tryed classic super mario world I can hear sound intro but image is cloudy, I don’t know wich word exactly to describe image. Of course I tryed with other cable and other cartrige but same result. Then I recheck all connection, every pad is right connected. I tried to jump jscic instead of wire scic to pin7 …no way! Finally I turn back to original state and try out again my snes without supercic board. I works perfect. I would like share photo and video but don’t know if it’s possible.
      Sorry for my english… Anyone had same issue? any idea what could be the fault? maybe deffective board

      #14911
      nobita
      Participant

        https://photos-3.dropbox.com/t/2/AABIpokWlp4prf52fb0Qa4TDo-vogRRd_fe9ND3Ou1ykRA/12/20187086/jpeg/32x32/1/_/1/2/P70903-113604.jpg/EJTUjw8Y7I0DIAIoAg/HnJiPNTMywbji6Or4Igb_maXY7rPcovlCyJ7efb6I3s%2Czu70fz3_t_3m5jYyJIM-LebkcspsbIVQVC7hjhErGL4?size=32x32&size_mode=5

        #14912
        nobita
        Participant
          #14916
          nobita
          Participant

            https://photos-2.dropbox.com/t/2/AAAowcTK_XwjyTSRcMlyZjia8FrKIa_PA0MzJPbGVLmlKA/12/20187086/jpeg/32x32/1/_/1/2/P70903-110706.jpg/EJTUjw8YgI4DIAIoAg/cR53ptpFemwV0zXXn65Kjwq8pP3iIGOXmdGcYE2v8Ow%2CtUvA-0-oqud5QYk8L-EfkXzk0divfaTA-MfyHXJ8gik?size=32x32&size_mode=5

            #14927
            nmalinoski
            Participant

              Everything in your last three posts requires authentication to view. The two image embeds just show Dropbox URLs, and visiting those directly gives me 403 errors; and the video link directly prompts for login. Perhaps the visibility settings are not correct?

              #14931
              nobita
              Participant

                Sorry for the inconvenience. I made link for everyone can acces to my dropbox folder with photos & video.

                https://www.dropbox.com/sh/7wb76adwshs3kdd/AADEWvUu0dUbGubOHgPd32z7a?dl=0

                #14957
                BuckoA51
                Keymaster

                  I asked our technician to look at this, he says you seem to have forgotten to install the PCB on to the cartridge pins on the underside of the motherboard.

                  #15003
                  nobita
                  Participant

                    You were right!!! I didn’t realize. Now it works… I’ll upload some pictures for anyone who wants to see in detail. So aprecciate BuckoA51 for support!

                  Viewing 8 posts - 1 through 8 (of 8 total)
                  • You must be logged in to reply to this topic.