SUPERCIC – Distorted picture

NewHome › Forums › Repairs and Upgrades › SUPERCIC – Distorted picture

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 1, 2020 at 12:56 PM #42522
    rogerxy
    Participant

      Hi
      I’ve installed borti’s SuperCIC/De-jitter on my 1CHIP PAL SNES.
      After the installation the game starts, the sound works and the 50/60-switch also seem to work.

      However, the picture is strange. Sometimes I get sound and black screen, then it can suddenly change to showing a picture but distorted:
      https://ibb.co/mJ7CzZ0
      https://ibb.co/MMxqV6Q

      I have doubled checked the installation manual, checked for shorts, checked that the required pads on the PCB has contact with it’s pad on the SNES PCB.
      Could it perhaps be something related to S-RGB? CS.i and CS.o (raw) goes to pink 7 on S-RGB and /Vmode goes to pin 9 on S-RGB.

      Any suggestions are deeply appreciated.

      Thank you
      /Roger

      January 10, 2021 at 12:16 PM #44329
      BuckoA51
      Keymaster

        Does this only happen when you play e.g PAL games at NTSC timings?

        January 13, 2021 at 8:25 PM #44430
        borti4938
        Participant

          Do you have any installation pictures? Otherwise it‘s somehow hard to say what is causing your issue.

        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)
        • You must be logged in to reply to this topic.