Video output with green tint

NewHome › Forums › RetroTink Products › Video output with green tint

Tagged: , ,

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • April 18, 2020 at 3:34 AM #37058
    HJRodrigo
    Participant

      Video output from the Genesis model 1 has a green tint while using HD Retrovision YPbPr Component Cable with both the RetroTINK 2X Classic and Pro. The issue can be temporarily fixed when I swap out the Genesis 1 with a Genesis 3 and then swap back the Genesis 1. Issue returns after not using the RetroTINK for a short period of time. Not sure which revision of the Model 1 Genesis I have at the moment, but I can provide this information if needed.

      April 29, 2020 at 2:00 PM #37335
      BuckoA51
      Keymaster

        Are you sure there’s nothing wrong with the cables you are using? Does the tint come and go as you wiggle the cable?

        October 31, 2022 at 2:51 AM #55581
        Hugbot
        Participant

          @HJRodrigo – Were you able to resolve this image? If so – how were you able to resolve it?

          I am currently experiencing the same issue where I turn on my system and it is VERY green tinted.

          October 31, 2022 at 3:53 AM #55582
          Hugbot
          Participant

            The solution for me was to use a different HDMI input. I have 5 different inputs and the 4th and 5th input do not work well apparently 🙁

          • Author
            Posts
          Viewing 4 posts - 1 through 4 (of 4 total)
          • The forum ‘RetroTink Products’ is closed to new topics and replies.