Das Muel

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 27, 2024 at 10:01 PM in reply to: Fried OSSC Pro #60981
    Das Muel
    Participant

      Hi Marqs,

      The F1 fuse is showing 4.94v.

      For what it’s worth, the AV4 HDMI input signal is also showing up correctly on the OLED screen.

      Thanks

      • This reply was modified 1 year, 4 months ago by Das Muel.
      March 25, 2024 at 5:31 PM in reply to: Fried OSSC Pro #60933
      Das Muel
      Participant

        It was powered on, yes. I will check the fuse. Thanks.

        March 24, 2024 at 11:24 PM in reply to: Fried OSSC Pro #60890
        Das Muel
        Participant

          Hi Marqs,

          It is a PAL model 2 Saturn. I’ve had the cable for many years and I’m almost 100% sure it’s wired for NTSC Saturns (I usually use it with a JP white model 2).

          I suppose the first thing that would have made contact with the Saturn would be the shielding around the din plug, but I barely made any contact with the console at all really. It was certainly never fully plugged in. I doubt any of the pins made full contact. The zap also set the trip off and took out the Extron 1804 that I had after it in the chain (bummer).

          I was tapping 5v for a simple Saturn 60/60hz switch and my best guess is that I didn’t sever the trace fully.

           

          • This reply was modified 1 year, 4 months ago by Das Muel.
          • This reply was modified 1 year, 4 months ago by Das Muel.
        • Author
          Posts
        Viewing 3 posts - 1 through 3 (of 3 total)