DaveDoc1984

Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • in reply to: OSSC v1.xx series beta firmware #61148
    DaveDoc1984
    Participant

      My wire appeared to have pinged off. I have since re-soldered it, made sure its more solid this time and now its syncing up fine even with 1.09.

      in reply to: OSSC v1.xx series beta firmware #61145
      DaveDoc1984
      Participant

        Hi, So I am seeing some weird results when trying 1.08 or 1.09. (Yes I have done the Modification and checked with my Multi-Meter to ensure all is connected as it should be with no Shorts).

        For Example, SEGA Dreamcast via VGA, on 1.08 it works fine. However when I update to 1.09 I get NO Sync whatsoever so no Display…

        With 1.08, When used with my Retro PC (which has a 3DFX Voodoo 3 3000 AGP Graphics Card) the OSD stays on and constantly the Resolution and Frequency counter is flickering and changing rapidly. Either side of the Screen is cut off too which I can’t work out how to put this right (as it was when I was running 0.90 before). However, If I knock the Resolution down from 1024×768 to 800×600 within Windows 98…. The colours go all dark and screwed up….

        With 1.09, my Retro PC won’t even Sync up at all (same behaviour as the Dreamcast) so I get no Display. Is there something I could have done wrong here?

      Viewing 2 posts - 1 through 2 (of 2 total)