EgillH

Forum Replies Created

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • November 21, 2018 at 10:10 AM in reply to: Trouble with PAL N64 #23862
    EgillH
    Participant

      I think I have 0,82… I’ll check when I get home 🙂
      I had tried this setting myself doing 4×270=1080 since it only makes sense but I never got a picture because my H.samplerate was way off and probably my h.pixels also. You need some time to wrap your head around all the tweaks and settings but once you do the OSSC is amazing 🙂

      November 21, 2018 at 1:49 AM in reply to: Trouble with PAL N64 #23853
      EgillH
      Participant

        Dude thanks you are my hero!!!
        Just one thing to get the apect ratio a 100% my ossc h.samplerate only goes to 2300. Cant seem to get it to 2460.
        Well it looks great anyways 😀

        November 20, 2018 at 4:11 PM in reply to: Trouble with PAL N64 #23837
        EgillH
        Participant

          Yeah I know about the difference in resolution. Just asking if someone has found a good solution, so far no luck with 4x in PAL… 🙁

          November 20, 2018 at 2:46 PM in reply to: Trouble with PAL N64 #23830
          EgillH
          Participant

            Mario 64 an Mario Kart work fine. Im guessing that the part of the picture that gets cut are just the PAL black boarders were left untouched.

            November 12, 2018 at 12:05 PM in reply to: 2x line 240p looks all jittery on my LG tv #23700
            EgillH
            Participant

              Thanks, I don’t think I can do as you suggest. I guess my TV cannot be considered “modern”. It’s from 2008 so…
              But I am happy with the 3x mode through HDMI to VGA. only that slot can show 1280×756 by the looks of it.

              November 11, 2018 at 8:16 PM in reply to: 2x line 240p looks all jittery on my LG tv #23685
              EgillH
              Participant

                Thank you again.
                Should my tv have settings like that? I can’t find them at least.
                I have resorted to converting the OSSC output to VGA so I can get 3x mode to work in “RGB PC” mode which looks great. That mode does not however support any of my 288p PAL consoles which is a bummer.

                November 10, 2018 at 1:19 PM in reply to: What does passthrough do excactly? #23671
                EgillH
                Participant

                  Thanks!
                  Putting tx mode to DVI? yeah I did nothing changed

                • Author
                  Posts
                Viewing 7 posts - 1 through 7 (of 7 total)