Merkurio
Forum Replies Created
-
AuthorPosts
-
January 28, 2025 at 11:02 PM in reply to: Colour issue using my new OSSC Pro with a DOS PC – no problem with OSSC v1.8 #64849
… sorry correction to #64847: Only pins 6, 7 & 8 are connected together.
January 28, 2025 at 11:00 PM in reply to: Colour issue using my new OSSC Pro with a DOS PC – no problem with OSSC v1.8 #64848… I posted the picture just for numeration of the pins, I refered to.
January 28, 2025 at 10:56 PM in reply to: Colour issue using my new OSSC Pro with a DOS PC – no problem with OSSC v1.8 #64847Hi back marqs,
Yes, pins 4 on both sides of the cable are connected together. And Pin 4 is NOT connected to GND (pin 5). Only pins 6, 7 & 9 are connected together.
January 28, 2025 at 9:10 PM in reply to: Colour issue using my new OSSC Pro with a DOS PC – no problem with OSSC v1.8 #64842Hi back BuckoA51,
No, my both VGA-cables I own, pin 4 not tied to ground
January 27, 2025 at 1:36 PM in reply to: Colour issue using my new OSSC Pro with a DOS PC – no problem with OSSC v1.8 #64831Hi back Zacabeb,
I think, you hit the problem exactly !
I’m also thinking, something is “making the graphics card think the OSSC Pro is a monochrome device”
As I wrote before (#64810) it’s very strange, that:
A. the failure doesn’t occur doing warm boot (ctrl old delete) from a running system but
B. the failure does occur doing boot with the reset button from a running system
With my second DOS machine (PCI graphics) everything runs in perfect colours !
For the future, I would like to try my C128/C128DCR’s in 80 Columns Mode with CGA2RGBv2 – unfortunately in that moment I don’t have access neither to this nor to any other VGA sources …
Thanks a lot,
Mario
January 27, 2025 at 12:57 PM in reply to: Colour issue using my new OSSC Pro with a DOS PC – no problem with OSSC v1.8 #64829Hi back marqs,
ad #64814 concerning sampling phase, I tried out some “turn off AUTO” – but maybe you could tell me the exact OSSC Pro’s menu item, you mean ?
ad #64818 concerning VGA-cable & pins, I tested with circuit indicator/checker every pin-pair (from end to start of my cables) – especially pin 4 (ID2) with no issue found.
The only thing, I could find out, which is different comparing my cable to the schema (from internet) below is: only pins 6, 7 & 8 (RGND, GGND, BGND) are short circuited – pin pair 10 (SGND) and pin pair 5 (GND) are separeted / not connected together – but I think that wouldn’t matter … ?
For that moment, I only have access to two (new) VGA-cables with the same colour issue, but I will have it in mind to try out others …
Many thanks,
Mario
January 25, 2025 at 5:17 PM in reply to: Colour issue using my new OSSC Pro with a DOS PC – no problem with OSSC v1.8 #64811… just opened my DOS machine – my graphics is the: Tseng Labs ET4000AX P/N 9109 REV (ISA-version)
January 25, 2025 at 4:55 PM in reply to: Colour issue using my new OSSC Pro with a DOS PC – no problem with OSSC v1.8 #64810Hi back marqs,
Yes, the same problems also happens with framelock turned OFF (60Hz, 50Hz, …)
p.s.: in the meanwhile I also found out, that the issue doesn’t occur (means colour is present correctly), in case of:
1. starting up my DOS machine as described in post #64799, followed by
2. computer “warm boot” (ctrl old delete) from the running DOS
–> it seems the whole issue will be determined in the first phase of “communication / hardware contact” between my OSSC Pro & my ISA graphics …
p.p.s.: yesterday I have also ordered a “new” graphics (with VESA Local Bus) at ebay – maybe I could report in some weeks how this will work …
Thank’s a lot,
Mario
January 24, 2025 at 11:44 PM in reply to: Colour issue using my new OSSC Pro with a DOS PC – no problem with OSSC v1.8 #64804Since now, no chance getting colours by having connected the VGA-cable during DOS boot process !
If I need to enter BIOS I have to accept “monochrome like style”
It seems, my OSSC Pro is kind of sensitive for some “signals” out of the VGA connection from my ISA graphics (TSEN LABS ET4000) during running DOS boot process …
I also tested with my second (faster) DOS machine – this has PCI graphics – with no issues & having colour also during boot process; very very strange of course😎
Thanks a lot,
Mario
January 24, 2025 at 9:21 PM in reply to: Colour issue using my new OSSC Pro with a DOS PC – no problem with OSSC v1.8 #64799Hi U all once again,
In the meanwhile, I found my problem solved by going this procedure:
1. connect my OSSC Pro as recommended to display and power supply – power OFF
2. let boot up my DOS machine COMPLETELY – without VGA connection to OSSC Pro !!!
3. after that – plug in VGA-cable to the OSSC Pro – then turn it ON
4. everything works in colour as it should do !!!
5. YES 👍👍👍
Many greetings from the Alps,
Mario
January 24, 2025 at 7:23 PM in reply to: Colour issue using my new OSSC Pro with a DOS PC – no problem with OSSC v1.8 #64798Hi back BuckoA51,
Yes, I get the same screen pictures in line multiplier mode – adaptive or pure …
January 24, 2025 at 1:23 PM in reply to: Colour issue using my new OSSC Pro with a DOS PC – no problem with OSSC v1.8 #64793attendum:
… DOS game „Prince of Persia“ or starting up Win 3.11 from DOS level works just fine.
-
AuthorPosts