Reply To: Capture card compatibility report thread
Hey guys, hoping for some help here with the Elgato Camlink. I’m able to capture line3x through it, albeit with significant lip sync issues. When in line4x mode, the camlink only displays the upper 2/3 of the screen. Line5x mode is completely garbled.
If I go to line5x mode and then back to line4x mode, the Game Capture software gets stuck in a “960p60 not supported” mode. I then have to back out and re-enter Game Capture to be able to get the same results as noted above. Pass thru and line2x work as well.
I have tested with multiple 240p consoles outputting SCART to the OSSC, all with the same result – Saturn, RGB modded N64, PS1. I reset settings on the OSSC, as well, everything is at default with Generic 4:3 for all tested line modes.
I saw the posts above about on-board Asmedia USB3.0 controllers, and of course my Asus P8Z68 Pro/Gen3 mobo is riddled with Asmedia controllers. I bought a PCI-e USB3.0 add-in card, and have the PC optimized to ensure resources on that PCI-e slot are not being robbed. I have also tested the USB3.0 card/camlink combo in all PCI-e slots, always with the same result.
I have captured Xbox 360 directly outputting to the camlink at 1080p60, and the camlink captures it perfectly.
The only other thing I have concern about is the system requirements for the camlink state: “CPU: 4th generation quad-core Intel Core i5 (i5-4xxx or comparable).” My CPU is a i7 2700k, Sandy Bridge 2nd generation @ 3.5Ghz. The fact that I’m able to capture the Xbox360 at full res and frames tells me this isn’t an issue, but maybe the abnormal resolutions from the OSSC require some extra processing that my older i7 doesn’t offer.
I have tried OBS as well, and it is hit or miss, often crashing, sometimes blue-screening with usbvideo.sys (I believe it is) failing.
Really hoping to get glorious line4x and line5x capture working.
line3x:
line4x:
line5x:
Stuck in 960p60 not supported:
