Reply To: OSSC not working, low current draw

NewHome Forums OSSC, OSSC Pro and DExx-vd isl OSSC – DIY Support OSSC not working, low current draw Reply To: OSSC not working, low current draw

#21260
Aussie_John
Participant

well it turns out that the fpga was dead, i ended up ordering a replacement from element14 and it worked first go after replacing it so either i got a bad fpga when i ordered the ossc kit or (and just as likely a scenario) it died somehow when i soldered it in.

as for the JTAG interface well it still doesn’t work however im suspecting that is because its a cheap chinese clone, i’ll have to investigate that later on