What’s the repercussions of taking amplified audio to a home stereo amp? Just wondering if there’s a way to test without causing damage, by taking the supergun output to a stereo amp input, and starting with volume all the way down?
I’ve actually done this unknowingly, and the stereo amp would produce some very infrequent garbled noise, but mostly produced nothing. Taking that same output through a hi-lo converter, it works perfectly (as it should). Alternatively, you could just start with a hi-lo converter, and take the output to a stereo amp. If you get nothing, then it’s not amplified. If you get good audio, then it is amplified. I’m thinking this would be the safest approach, lacking any documentation on the supergun.