Reply To: Updated FW to 0.83 on OSSC 1.6 and remote is not working

NewHome › Forums › OSSC & OSSC Pro › OSSC – Discussion and support › Updated FW to 0.83 on OSSC 1.6 and remote is not working › Reply To: Updated FW to 0.83 on OSSC 1.6 and remote is not working

July 17, 2019 at 6:13 PM #27041
Morpheus_79
Participant

If the green LED of your OSSC blinks while pressing a button on your remote (but nothing else happens) -> you can try the following:

http://junkerhq.net/xrgb/index.php?title=OSSC#Remote_control_setup

Now, power cycle the OSSC while holding BTN1 on the OSSC’s PCB. A target function name (e.g. “MENU”) will then be displayed on the OSCC’s LCD screen. Press the corresponding key on the remote control, if the OSSC receives the code correctly you will be prompted to confirm the new code. Press the same key again to confirm, or BTN0 on the OSSC’s PCB to go to the previous key. If you press BTN0 when configuring the first key, the default keymaps will be loaded.

Once all remote control keys/buttons are programmed, the new keymap will be saved and the OSSC will return to normal operation.

If the green LED does NOT blink, there may be something wrong with your remote.