NewHome › Forums › Repairs and Mods › OSSC Help for Dejitter SNES – SHVC-CPU-01 (slight noise, green signal, jailbars) › Reply To: OSSC Help for Dejitter SNES – SHVC-CPU-01 (slight noise, green signal, jailbars)
Thanks for the info! I’ll try that.
I already learned the hard way to add a 330ohm resistor to TTL sync doing this mod as I needed to build a SCART cable at the same time. Misunderstood what exactly was being outputted by the DeJitter board, and thought the sync was already adjusted to safe levels. Fed my OSSC with TTL sync for a few seconds making it crash – yikes 🙂
We’ll see if routing sync to two pins will be useful. To be honest the only thing I hope to achieve is to be able to use the more expensive cable so it won’t end up in the drawer. The quality from the DeJitter’d SHVC + OSSC optimal settings is comparable to an FPGA SNES, even with the homecooked cable 😀